Heatit

Protocol Z-Wave, 868,4 MHzSDK 6.71.00Rated voltage 10 – 24V DC 8 – 20V ACPower consumption 0,6W + 0,5W pr. active relay (max 4W)Screw terminals 0,2 – 2,5 mm²Outputs 6 x 1-pole potential free (10mm clearance)Relay switches AC1: 16A 250V AC, AC3: 750W ..

Protocol Z-WaveSDK 6.71.00Rated voltage 230V 50/60HzMax load 3600W/5750W (resistive load) 750W self-limiting heating cableMax current 16A or 25APower consumption <2,0WMin/max installation temp -20°C – 40°CMin/max operating temp -20°C – 40°CHysteresis&n..

Protocol Z-WaveChip Z-Wave 500 chipRated voltage 230V AC 50Hz, 200mAh, NiMh back-up batteryPower consumption 2,2WTemperature sensitivity ±1°CAlarm 85dB at 3 meters distanceSmoke sensor PhotoelectricAmbient temperature 0°C to 50°CHumidity Max. 85% RHRange,..

Heatit Z-Temp2 is a battery-operated thermostat designed for use with water based heating systems. Used in combination with the Heatit Z-Water regulator you can control your heating system with a Z-Wave primary controller/gateway with the use of Heatit Z-Water in combination with one or several Heat..

Z-Wave thermostat for controlling external relayInternal room sensorHumidity sensorProximity sensor to turn on the displaySmartStartAutomatic brightness controlFirmware update (OTA)Weekly program/setback via gateway5 associationsLock mode/child lockSupports encryption modes S0, S2 Authenticated Clas..

Regulator for waterbased heating systemsRelay outputs can control actuators in a waterbased floor heating systemMay be used to control both 24V actuators and 230VAC actuatorsMay be used with a Heatit Z-Temp2 or Heatit Z-TRM3 thermostat in each zoneDIN-rail mountingWorks as a Z-Wave repeater to impro..

Floor sensorExternal room sensorInternal room sensorTemperature limiterPower regulatorZ-Wave Plus chip, 500 seriesWeekly program via gatewaySetback mode via gateway or pilot wireLED-diodeCan be used in connectionwith different NTC-sensorsLock mode/child lockBacklight..

..

..

..