Rubej

Optical-electronic fire smoke detectors IP 212-141 is designed to detect fires,accompanied by the appearance of low concentrationsmoke in closed rooms of various buildings and structures.The detector is powered and the "Fire" signal is transmittedvia a two-wire alarm loop and is accompanied by the i..

Reception and control device and control fire and security address "RUBEZH-2OP" prot.R3 is intended for use in address systems of burglar and fire alarms, fire extinguishing, smoke removal, alerts.On the security and fire addressable devices "RUBEZH-2OP" prot.R3, you can build a distributed address ..

Button Vyrabatyvaya fire alarm only if you press the start button a man, a manual fire detector..

Supply voltage from a constant current source 24 ± 4 VConsumption current when powered by 24 V, no more than 40 mASound pressure level at a distance of 1 m not less than 100 dBSound signal frequency range 2-4 kHzOverall dimensions 87x88x44 mmEnclosure protection class IP 41Weight 90 gOperating tempe..

The fire detector IP 212-45 is an optoelectronic device that signals the appearance of smoke at the installation site...

The fire detector combined optoelectronic thermalmaximum differential addressable analog IP 212 / 101-64-PRis designed to detect fires, accompanied by the appearanceof low concentration smoke, as well as an increase intemperature inside the controlled space in closed roomsof various buildings and st..

The device RUBEZH-4A receiver-control and managementof fire address is intended for use in address systems of fire alarm,fire suppression, smoke alarm, and notification.On fire address devices RUBEZH-4A can build a distributed address systemPS with a connection to the network of up to 60 panels.For ..